EGX-350Automated Engraving Machines

MODEL EGX-350 Table Size 12”(X) x 9.1”(Y) [305 mm x 230 mm] Max. Cutting Area 12”(X) x 9.1”(Y) x 1.6” [305 mm(X) x 230 mm (Y)] x 40mm(Z) Feed Rate X, Y-axis : Up to 2.4 ips (60mm/sec). Z-axis : Up to 1.2 ips (30mm/sec) Software Resolution 0.004” (0.01 mm) /step or 0.001” (0.025 mm ) /step (XY axis only) Mechanical Resolution X, Y -axis : 0.0001 in. (0.0025 mm) /step Spindle Motor Brushless DC motor, max. 50 W Revolution Speed 5,000 to 20,000 rpm Tool Chuck Cutter holder and collet Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant) Instrction System RML-1 Power Requirements AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1) Acoustic Noise Level During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779) (According to ISO 7779) External Dimentions 15.5" (W) x 24.3" (D) x 23.3" (H) [393 (W) x 616 (D) x 591 (H) mm] When cover is open: 23.56" x 21.5" x 27" [598 mm (W) x 545 mm (D) x 685 mm]