High Hose Stand Alone CNG Dispenser [P7203-6CNG50-S]

This dispenser is a three-line dual hose dispenser that independently meters the gas and gives you a display on both sides of the dispenser. Flow Rate as high as 15Kg/min have been seen with this dispenser in certain configurations. The New Micro Motion ® CNG50 sensor is used in this dispenser to achieve the flow rate. The dispenser has Modbus RS 485 communication port for Flow meter communications and SCADA output to remote controllers. The dispenser has a dry contact and a 220VAC hook switch The Micro Motion ® transmitters power is 24 VDC are located within the dispenser body and are factory set up and calibrated before shipment. TGT assembles an ANSI approved Synflex make CNG fill hose on all its dispensers. The Breakaway is the Staubli In-Line types with a unique TGT make vent Breakaway attached to the fill hose Breakaway. All TGT CNG Dispensers have an ASME pressure relief valve inside the dispenser cabinet with a vent stack up through the dispenser body. The cabinet is constructed of cold roll steel with a powder-coated finish; stainless steel material is optional. The high body style gives you the look of contemporary gasoline dispenser. The standard color is black but any custom colors can be applied to the dispenser body. These dispenser will temperatures compensate the fill pressure of the gas and do electronic sequencing of the gas from the storage to the dispenser using the Acufill® algorithm. All of the sequencing valves are mounted internal in the dispenser.