Home·AGNEE TRANSMISSIONS (INDIA) PRIVATE LIMITED·Products·Helical Inline Geared Motor

Helical Inline Geared Motor

Name: Helical Inline Geared Motor
Brand: Agnee
SKU: AM Series
Availability: MadeToOrder

Certificates:ISO 9001:2015ISO 9001:2008NSIC (National Small Scale Industries Corporation)

AGNEE TRANSMISSIONS (INDIA) PRIVATE LIMITEDKota, RJ

Storefront

Anchored to the MCA registerCIN U31200RJ2005PTC021458

Brand AgneeSKU AM Series

Price on request. Ask the factory for a quote.

MOQ 1 1 dayCurrency INR

Estimated delivery in about 6 days

Customization for this product

N/A

Key attributesAll specs

Service

1-day production

Standard lead time once order is confirmed.

Highlights at a glance

Brand: Agnee
Category: Geared Motors
Made in Kota, RJ, India
Minimum order: 1 units
Lead time: 1 day
Certified: ISO 9001:2015, ISO 9001:2008, NSIC (National Small Scale Industries Corporation)

About this item

Transparent Pricing
100% Genuine
Introductory Bulk discount on Single piece purchase also and P&F waived off
High power to weight ratio
Low volume to enable installation in the most difficult situations
Gears are case carburized and profile ground to a hardness of 58-62 HRC for higher durability
Profile ground helical gears ensure high standards of accuracy, surface finish and quiet running characteristics

Description

Agnee Techbox ‘AM-Series’ helical inline gearbox and helical inline gear motors are available in Double / Triple reduction models having motorised /solid inputs are intended to satisfy all the requirements of a reliable drive for slow-speed high-torque application. Agnee helical Inline gear motor are fully meteric and suitable for most applications in both horizontal and vertical drive and is available in foot mounted and flange mounted versions. Based on a modular design and construction, the high degree of interchangeability of parts and sub assemblies among all variants effect considerably economies of production, whilst maintaining the highest standard of component and unit elements. A wide choice of ratio is available. Standard range of AGNEE helical inline gear motors, offer un-parallel performance covering output speed graduated from 9 to 1230 rpm with motor power ratings ranging from 0.18 kW to 90 kW. AM series helical gear motor can be applied for continuous duty under difficult operating conditions. High quality alloy case hardening material provide long life, wear resistance and fatigue strength. Gears are case carburized and profile ground to a hardness of 58-62 HRC for higher durability. Profile ground helical gears ensure high standards of accuracy, surface finish and quiet running characteristics. Gear Case and flanges are of high strength gray cast iron . The high power to weight ratio of all units combined with low volume to enable installation in the most difficult situations The Input power range of our Helical Gear Motor is 0.18KW to 90 KW and Transmission ratio range is 1.4-250.

Ex Stock Delivery

Inline helical geared motor Models
AM 0420
AM 0620
AM 0720
AM 0820
AM 0920
AM 1020
These are running models and usually available for delivery within 1 day

Technical Characteristics

TECHBOX Helical Gear Units are designed for continuous duty under difficult operating conditions
State of the art gear box housing designed for operation under harsh conditions
Gear case and flanges of high strength gray cast iron
Compact closed rigid, precise, monobloc, cast iron housing for preventing of lubrication loss and dirt built up.
Gear Wheels made of high strength case hardened steel.
Highly wear resistant though flank hardness of 58-62 HRC
Tooth Flanks of all gear wheels are hobbed and profile ground to AGMA 10 accuracy for low noise and high efficiency.
Strong, non flexible pinion shafts and bearings guarantee an exact tooth meshing
Oversize bearings size to withstand higher loads
Dual bearing support on the input shaft assures precise alignment of the first stage gears and reduces vibrations and consequent gear wear
Shafts are made from En-8 and tempered thus increasing their capacity to withstand shearing stress
To withstand higher radial loads, Smaller overhang distance of output shaft from supporting bearings.
Mechanical parts locked in their positions by snap rings and spacers. This also ensures better absorption of axial thrust and prolongs the life of bearings.
Higher ratio available through attachment of pre stage or pre connected gear box
Ratios available from 1.4 – 250All units are dimensionally interchangeable with other major manufacturers.

Features

Helical Gear Units are designed for continuous duty under difficult operating conditions.
Gears are carburized to a hardness of 58 – 62 HRC for durability.
Gear case and flanges of high strength gray cast iron.
Foot mounted, flange mounted.

Technical Data

Input Power : 0.18 KW to 90 KW.
Transmission Ratio : 1.4-250
Mounting Structure : Foot & Flange Mounted
Model : AM-03 to AM-14
Applications : Conveyors, Agitators, Elevators, Cranes, Crushers
Industries Covered: The helical inline gear motors are widely applied in Power Plants, Coal, Cement, metallurgy, harbor, agriculture, military industry, shipping, lifting, environment protection, logistic, weaving, paper making, light industry, rice mill, solvent extraction, ceramic industries, steel industry, minerals, food & tobacco, plastics and other regions, chemicals, pharma, packaging, food processing, automation etc.

Key attributes

Category	Geared Motors
Brand	Agnee
Model number	AM Series
Place of origin	Kota, RJ, India
Minimum order	1 units
Lead time	1 day
Dimensions	1.23 × 1.23 × 1.23 N/A
Weight	1.23 kg
Warranty	N/A
GTIN	N/A
MPN	N/A

Packaging & delivery

Carton size	1.23 × 1.23 × 1.23 N/A
Gross weight per unit	1.23 kg

Certificates

ISO 9001:2015

ISO 9001:2008

NSIC (National Small Scale Industries Corporation)

Reviews

Reviews here are order-verified. Only buyers who completed a delivered order can rate this supplier, so the first review appears after the first delivery on BharatSeal.