PVDF Ball Valve Flange End

Material Of Construction: PVDF(Polyvinylidene fluoride) Design: 3 Piece Design Maximum working temp: 120 °C (consistently) Connection End: Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. Construction: 3 piece design, 1 piece stem (spindle), full bore, Teflon seated Hydraulic Test Pressure: Body-150 PSI & SEAT-100PSI Size Range: ½” 15MM TO 12’’-315MM Standard: As per manufactuer’s

No.: 1) DESCRIPTION: Side Piece /Flanged end QTY.: 2 MATERIAL: PVDF No.: 2) DESCRIPTION: Body QTY.: 1 MATERIAL: PVDF No.: 3) DESCRIPTION: Ball QTY.: 1 MATERIAL: PVDF No.: 4) DESCRIPTION: Stem/Spindal QTY.: 1 MATERIAL: S.S No.: 5) DESCRIPTION: Seat Ring QTY.: 2 MATERIAL: PTFE (TEFLON) No.: 6) DESCRIPTION: Body”O”Ring QTY.: 2 MATERIAL: Noeprene No.: 7) DESCRIPTION: Stem Seal Ring QTY.: 1 MATERIAL: PTFE (TEFLON) No.: 8) DESCRIPTION: Stem “O” Ring QTY.: 1 MATERIAL: Neoprene No.: 9) DESCRIPTION: Stud, Nut & Washer QTY.: REQ MATERIAL: S.S No.: 10) DESCRIPTION: Nut Cap QTY.: REQ MATERIAL: Polypropylene. No.: 11) DESCRIPTION: Handle QTY.: 1 MATERIAL: M.S. PP Coated. No.: 12) DESCRIPTION: Handle Hex. Pin QTY.: 1 MATERIAL: M.S./ S.S. No.: 13) DESCRIPTION: Handle Cap QTY.: 1 MATERIAL: Polypropylene.

ALL DIMENSIONS ARE IN ± 2 MM Size: 1/2″ L: 15 mm T: 140 OD: 12.5 ID: 100 H1: 13.5 H: 130 Size: 3/4″ L: 20 mm T: 142 OD: 14 ID: 101 H1: 19 H: 131 Size: 1″ L: 25 mm T: 160 OD: 20 ID: 123 H1: 24 H: 165 Size: 1 1/2″ L: 40 mm T: 182 OD: 20 ID: 140 H1: 38 H: 197 Size: 2″ L: 50 mm T: 208 OD: 22 ID: 165 H1: 50 H: 200 Size: 2 1/2″ L: 65 mm T: 227 OD: 25 ID: 185 H1: 63 H: 255 Size: 3″ L: 80 mm T: 248 OD: 25 ID: 201 H1: 75 H: 255 Size: 4″ L: 100 mm T: 302 OD: 28 ID: 228 H1: 100 H: 350 Size: 6″ L: 150 mm T: 428 OD: 30 ID: 300 H1: 150 H: – Size: 8″ L: 200 mm T: 505 OD: 32 ID: 360 H1: 201 H: – Size: 10″ L: 250 mm T: 570 OD: 34 ID: 425 H1: 242 H: – Size: 12″ L: 315 mm T: 590 OD: 35 ID: 487 H1: 300 H: –