Home·THERMO FOAM INDUSTRIES PRIVATE LIMITED·Products·Calcium Silicate Insulation

Calcium Silicate Insulation

Name: Calcium Silicate Insulation
Brand: THERMO FOAM INDUSTRIES PRIVATE LIMITED
Availability: MadeToOrder

Certificates:Class 1 for surface spread of Flame CharacteristicsClass ‘O’ for Fire PropagationFire-rated “CLASS O”Class 0 complied+2 more

THERMO FOAM INDUSTRIES PRIVATE LIMITEDChennai, TN

Storefront

Anchored to the MCA registerCIN U33111TN1979PTC007925

Price on request. Ask the factory for a quote.

MOQ not stated Lead time on requestCurrency INR

Key attributesAll specs

Highlights at a glance

Category: Insulation Products
Made in Chennai, TN, India
Certified: Class 1 for surface spread of Flame Characteristics, Class ‘O’ for Fire Propagation, Fire-rated “CLASS O”

Description

The raw material of Thermofoam calcium silicate board is high-purity quartz flour, high-grade portland cement,high-purity slaked lime, plant fiber, and other mineral added substances. Thermofoam calcium silicate board is for indoor partition and ceiling of moisture-proof and fireproof in the wet area building for both civil and industry application. So Calcium silicate board whose main component is just this kind of crystalloid, has good fire retardancy, water resistance, high strength, durability, and so on.

FEATURES

100% Asbestos Free
Fire Resistance and Moisture Resistance
High Strength and Good Stability
Anti Fungus and Antiseptic
Widely used in Partition and Suspension System.
Easy working
Anticorrosive

CEILING INSTALLATION METHOD

Carry out ceiling line-measuring to determine the ceiling’s fixed position, the boom’s central range is generally 1200. 
Connect and fix the boom and main keel with a hanging piece to make the main keel keep its level position. 
Vertically fix the sub-keel to the main keel with the hanging piece; the sub-keel axis central range is 612mm. 
Install the laterally supporting keel properly, its central range is 1224mm. 
Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.

Thickness(mm)

5/6

SIZE

Width(mm) 595/603 Length(mm) 595/603

Weight(kg/pcs)

3.50

PARAMETERS

Deviation in thickness: ±0.5mm Bending strength: ≥ 12MPa(EMC) Moisture content: ≤ 10% Thermal Conductivity: ≤ 0.3W/(m.K) Temperature resistance ±120 Celsius Density Density: 1100—1300kg/m3 Modulus of Elasticity: 7100±500MPa(Wet) Wet expansion: ≤ 0.2% Frost Resistance: -30 Celsius Incombustibility A grade fireproof

NOTICE

The hanging system of Thermofoam board combined with light steel keel is divided into two kinds of person-standing type and non-person-standing type; for the non-person-standing type, only consider the self-weight of ceiling and light. Lamp without loading other loads; for the person-standing type. Consider about 80~100kg load when someone repaired it.

Insulation thickness (mm)

50 75 100

Range of R-value (Thickness/Conductivity) * in SI and PI unit [ R-SI in m2.K/W and R-PI in sq.ft.F.Hr./Btu]

85 - 89% 90 - 93% 92 - 94%

Roof U-value range in SI and PI unit [U-SI in W/m2.K and U-PI in Btu/sq.ft.F.Hr]

85 - 89% 90 - 93% 92 - 94%

Insulation efficiency in percentage [ {U(uninsulated)-U(insulated)}/ U(uninsulated) x 100]

85 - 89% 90 - 93% 92 - 94%

Fire-rated “CLASS O”
Very low water vapor permeance (0 perms)
High water vapor diffusion factor (> 17,000)
The very low water absorption rate (0.06% by volume)
High thermal efficiency (λ24˚ C = 0.033 W/mK; λ46˚ C = 0.035 W/mK)
Wide temperature range (from -50˚ C to +105˚ C)
Chemical resistance – Resistant to most chemicals (sodium, silica, fluoride, chloride, etc.)
Antibacterial & antifungal
Environmental friendly – ODP = 0 and GWP < 5
Very low VOC emission level ( < 6 µg/m2/hr in 24 hours)
Sound absorption properties
Perfect fit to most of the pipe sizes
Easy and fast to install

Certificates

Class 1 for surface spread of Flame Characteristics

Class ‘O’ for Fire Propagation

Fire-rated “CLASS O”

Class 0 complied

BS (British Standard) 476 part 4, ISO 1182, IS 3808, International Maritime Organization (IMO) - NON-COMBUSTIBLE

Reaction to fire A1 as per EN 13501

BS 476 part 6 – Does not PROPAGATE FIRE

BS 476 part 7- Class 1 - SURFACE SPREAD OF FLAME is NIL

BS 476 part 5 – Designated as P - (not easily ignitable)

BS 6853 (toxicity index 0.65) - NON-EMISSION OF SMOKE and TOXIC GASES

Dubai Civil Defense (DCD) Certified

Class ‘O’ Fire Rated

Incombustibility A grade fireproof

Reviews

Reviews here are order-verified. Only buyers who completed a delivered order can rate this supplier, so the first review appears after the first delivery on BharatSeal.