| Place of origin | Bengaluru (Urban), KA, India |
| CPU | LPC2148 16/32 BIT ARM7TDMI-S with 512K bytes Program Flash, 42K bytes RAM |
| Cable | Serial RS232 cable is included |
| Crystal | 12MHz |
| Compiler | The software examples are compiled using an evaluation version of KEIL4 ‘C’ compiler for ARM |
| DC Motor | DC motor interface with direction and speed control |
| Enclosure | Compact elegant plastic enclosure |
| Key Matrix | 4×4 Key-Matrix connected to the port lines of the controller |
| LCD Display | LCD 16×2 display alphanumeric display |
| Power Supply | Input to this will be from External +5V DC Power supply through a 9-pin DSUB connector |
| DAC Interface | 8-bit DAC interface |
| I2C Interface | I2C Interface: NVROM IC |
| SPI Interface | SPI Interface: 2 channel ADC IC with POT and Temperature sensor |
| Stepper Motor | Stepper motor interface with direction and speed control |
| FRC Connectors | Standard 26-pin FRC connectors to connect to on-board interface or some of ALS standard External Interfaces |
| JTAG Connector | Standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG |
| RS232 Interface | One RS232 interface circuits with 9 pin DSUB connector: this is used by the Boot loader program, to program LPC2148 Flash memory without external Programmer |
| Buzzer And Relay | Interface circuit for on board Buzzer and Relay |
| 7 Segment Display | Four-digit multiplexed 7-segment display interface |
| Software Examples | A number of software examples in ‘C-language’ to illustrate the functioning of the interfaces |
| Voltage Regulator | One on board voltage regulator for generating 3.3V |