Home·Jainex Limited·Products·Cold Rolled Steel Strips

Cold Rolled Steel Strips

Jainex LimitedMumbai, MH

Storefront

Anchored to the MCA registerCIN U51900MH1972PLC094147

Price on request. Ask the factory for a quote.

MOQ not declared by manufacturerLead time not declared by manufacturerCurrency INR

Key attributesAll specs

Place of origin

Mumbai, MH, India

C75S

C75S Mechanical Properties Hardness (HV) Elongation % Tensile Strength (N/mm²)

C75 Grade

C75 Thickness (mm) 0.10 – 8.00 Full Width Range (mm) 300 – 400 Slit Width (mm) 6.00 – 250 Finish Bright, Matte Edges Sheared Edge Slitting Thickness (mm) 0.20 –

C80 Grade

C80 Thickness (mm) 0.10 – 8.00 Full Width Range (mm) 300 – 400 Slit Width (mm) 6.00 – 250 Finish Bright, Matte Edges Sheared Edge Slitting Thickness (mm) 0.20 –

C98 Grade

C98 Thickness (mm) 0.10 – 2.00 Full Width Range (mm) 300 – 400 Slit Width (mm) 6.00 – 250 Finish Bright, Matte Edges Sheared Edge Slitting Thickness (mm) 0.20 –

Description

Description 1. Material Selection and Preparation: Start with a coil or sheet of carbon steel, typically in the form of hot-rolled coil or sheet 2. Pickling: Surface cleaning with acid to remove any contaminants, scale, or oxides that may have formed during storage or previous processing steps. 3. Cold Rolling: The cleaned steel strip is fed into a series of rolling mills Each pass through the rolling mill reduces the thickness of the steel while increasing its length. The steel strip is subjected to pressure between rollers to deform it into the desired thickness and shape. Cold rolling is typically performed at room temperature or slightly below to improve the material’s strength and hardness. 4. Annealing (Optional): After cold rolling, the steel may undergo an optional annealing process to relieve internal stresses and improve ductility. Annealing may involve heating the steel to a specific temperature and then gradually cooling it down in a controlled environment. 5. Skin Pass (Optional): In some cases, a skin pass or temper rolling process may be performed after cold rolling to improve surface finish and remove any remaining surface imperfections. This process involves passing the cold-rolled strip through a set of rollers with a very light reduction in thickness. 6. Trimming and Slitting Trim irregular edges and ensure uniform width of the cold-rolled strip. Slit the cold-rolled strip into narrower coils or sheets, if required, using slitting machines. 7. Inspection

Key attributes

Place of origin	Mumbai, MH, India
C75S	C75S Mechanical Properties Hardness (HV) Elongation % Tensile Strength (N/mm²)
C75 Grade	C75 Thickness (mm) 0.10 – 8.00 Full Width Range (mm) 300 – 400 Slit Width (mm) 6.00 – 250 Finish Bright, Matte Edges Sheared Edge Slitting Thickness (mm) 0.20 –
C80 Grade	C80 Thickness (mm) 0.10 – 8.00 Full Width Range (mm) 300 – 400 Slit Width (mm) 6.00 – 250 Finish Bright, Matte Edges Sheared Edge Slitting Thickness (mm) 0.20 –
C98 Grade	C98 Thickness (mm) 0.10 – 2.00 Full Width Range (mm) 300 – 400 Slit Width (mm) 6.00 – 250 Finish Bright, Matte Edges Sheared Edge Slitting Thickness (mm) 0.20 –

Reviews

Reviews here come from delivered orders. Only buyers who completed a delivered order can rate this supplier, so the first review appears after the first delivery on BharatSeal.