Application Instructions

Surface preparation Surfaces should be clean, dry and free from all contamination. The surfaces should be cleaned using an appropriate cleaner. Primers may be required on some substrates. It is recommended that Adshead Ratcliffe Technical Services should be consulted and advice obtained with regard to the choice of primer for specific purposes Application Unwind the tape and apply the �open� face directly to the frame. Cut to the required length forming tight butt joints at the corners. Press the tape firmly onto the surface by hand or by using a seam roller. Remove the protective liner immediately before glazing. Carefully position the IG unit onto the tape and apply pressure to consolidate the bond. The structural silicone can now be applied.

No questions yet. Ask the first one: the supplier is notified and the answer is posted here for every buyer.