Continuous Rim Diamond Cylindrical wheel

Diamond Cylindrical wheel is used to make rough cutting after diamond calibrating roller on ceramic tiles surface. It can also be used to calibrate and achieve a uniform thickness on ceramic tiles surface in replace of Diamond Calibrating Roller. By both rotating of spindle and the cylindrical wheel when working, the high-efficient cutting effect is generated to make ceramic tiles surface more flat and smooth, with which the polishing speed can be increased, the consumption of polishing abrasives can be reduced and the re-polishing rate can be lowered. Out diamond cylindrical wheels are approved for their high cutting efficiency, fine & even cutting mark and good flatness on ceramic tiles surface. According to different production technique it is classified into Continuous Rim Cylindrical Wheels and Segmented Cylindrical Wheels. Whole sintering craft is adopted to produce this type of cylindrical wheel, continuous rim working area, more fine ceramic tiles surface.

Working Conditions: Water Cooling Suitable machines: KEDA, ANCORA, BMR, PEDRINI, KEXINDA, JCG, KELID etc. various calibrating machines Application scopes: Various porcelain tiles, vitrified tiles, crystal tiles, floor tiles, wall tiles etc. in different sizes like 600x600, 800x800, 1000x1000, 600x1200, 300x300, 300x600 and so on.