ECO PLASTER

Colour: Grey Main Binder: Ordinary Portland Cement Fine aggregate: Processed, Graded Sand (Max. Size of Aggregate : 3.00mm) Polymers: Special Polymers having a) adhesion and b) Self Curing Properties Bulk Density: 1500 Kg/CuM Coverage: 1.6kg/Sqm/mm i.e. 1.50Kg/Sq ft area considering 10 mm thickness Pot Life: 90 mins Compressive Strength, 28days: 8.00 -10.00 N/mm square Shelf Life: 6 Months

Surface must be free of dust /loose particles, grease, mould oil, rust metal, wood peels, paints and plastics Pre-wetting of substrate: Surface must be dampened / moistened before the application of Plaster. Ensure there is no stagnant or frequent water flow on substrate while applying the plaster

18-20% water (by weight of material) is required for mixing. Mixing can be done either manually or with mechanical mixer/stirrer. It is advisable to use a mechanical Mixer to get homogeneous mix. The material should be applied within 2 hours of preparation. The Plaster can be applied by hand or spray machine to the required thickness. Product is designed in a such way that, it can be applied even up to 20mm thick in a single coat.

Natural air curing is enough. However, water mist is required under extremely hot or dry condition ( at least three times a day for initial three days. Generally, water mist can be initiated if temperature levels exceeds 38ºC ..ref Building Code Requirements for Masonry Structures (ACI 530/ASCE 5/TMS 402) [Ref. 6], table 1)

Speed Dry Mix - ECO PLASTER is delivered in 40Kg bag. Storage life is six months if the product is stored in a dry place

- Recommend to wear NIOSH approved or equivalent particulate face mask when mixing the material. - Material contains cement, which may produce an allergic effect - Keep out of reach of children - Material may cause irritation to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance. Avoid contact with eyes and prolonged contact with skin.