Home·TRANSGEAR POWER SYSTEMS PRIVATE LIMITED·Products·Compact Substations
Back to all products
Compact Substations

Compact Substations

Certificates:ISO 9001/2008 certifiedISO 9001/2008 certified
TRANSGEAR POWER SYSTEMS PRIVATE LIMITEDBangalore, KA
Storefront
Anchored to the MCA registerCIN U31104KA2014PTC077245
Price on request. Ask the factory for a quote.
MOQ not stated Lead time on requestCurrency INR

Description

Compact Substation essentially consists of an assembly of the following on common base. - H.V compartment - M.V Switchgear (RMU / LBS / VCB) with metering & protection. - Transformer compartment – Transformer (Oil type / Dry type Up to 2500KVA, 3.3kV/11kV/22kV/33kV, OCTC/OLTC). - L.V compartment - L.V Switchgear – ACB / MCCB / SFU with metering & protections.

Product Specification

  • Design conforms to International Electro technical Commission (IEC)62271-202 standard.
  • Compact substation construction saves floor space (Up to 70% in comparison with conventional systems).
  • Designed to withstand electrical impulses, thermal & dynamic stresses.
  • Equipments mounted on common ISMC channel base with fabricated CRCA sheet steel. Easy to lift both from top and bottom of CSS.
  • Easy installation / Maintenance of Transformer – Transformer can be installed / accessed from roof top or hinged doors / side panels.
  • Safety – Duct and Pressure relief flaps provided for operator and public safety from internal arc.
  • Meets IP55/IP54& IP23 degree of protection.
  • Designed to withstand electrical impulses, thermal & dynamic stresses.
  • Cost Effective – Costly cabling eliminated. Reduced civil work. Factory assembled & Factory tested, thus reducing the work to be done at site.
  • Enclosure is Aesthetically pleasing.
  • Protection from Unauthorized access & Environmental Hazards.
  • One point contact – Easy specification.
  • Low power loss and Low noise transformer.
  • Short delivery & ready for commissioning.
  • Custom built – variety of choices for MV/LV switchgears, no. of feeders to suit user requirements.
  • Modern manufacturing techniques ensure cost effectiveness, reliability & long trouble free performance, and better safety.

Applications

  • Replacement for conventional pole mounted transformers
  • Residential Complexes / Apartments
  • Commercial Buildings
  • Industries
  • Power Distribution
  • Hospitals
  • Software Parks
  • Development Projects
  • Construction Sites
  • Solar Power Generation

Standard Components

| HV COMPARTMENT | TRANSFORMER COMPARTMENT | LV COMPARTMENT | | --- | --- | --- | | LOAD BREAK SWITCH(LBS)<br> OR<br> RING MAIN UNIT (RMU)<br> OR<br> VACUUM CIRCUIT BREAKER (VCB) | OIL FILLED TRANSFORMER<br> OR<br> DRY TYPE (VPI/CAST RESIN) TRANSFORMER | ACB / MCCB WITH BUILT IN OVER CURRENT, SHORT CIRCUIT AND EARTH FAULT PROTECTION | | COMPARTMENT FITTED WITH LOCKABLE SWING HANDLE AND THREE POINT LATCH | COMPARTMENT FITTED WITH LOCKABLE SWING HANDLE AND THREE POINT LATCH | COMPARTMENT FITTED WITH LOCKABLE SWING HANDLE AND THREE POINT LATCH | | POWER FUSES<br> AND / OR<br> SHUNT TRIP COIL | INTERNAL LIGHTING | TVM,METERING(VOLTMETER AND AMMETER WITH SELECTOR SWITCHES) | | DOOR LIMIT SWITCH | CABLE / BUS BARS FOR HV AND LV CIRCUIT BREAKER CONNECTION | ELECTRICAL INDICATORS AND INTERNAL LIGHTING | | WTI (ANALOG / DIGITAL)& OTI | LOUVERED COVERS | SPACE HEATER WITH THERMOSTAT CONTROL | | | | AUXILIARY SUPPLY PLUG AND SOCKET | | | **OPTIONAL ACCESSORIES** | | | VARIOUS RELAY PROTECTIONS | OFF CIRCIUT TAP CHANGER (OCTC) / ON LOAD TAP CHANGER (OLTC | 'N' NO. OF DISTRIBUTION BREAKERS (ACB/MCCB) | | HT METERING | | APFC PANEL / CAPACITOR BANKS | | SURGE / LIGHTNING ARRESTORS | | SYNCHRONISATION PANEL |

Technical Specification

| RATED VOLTAGE (kV) | 3.6 | 7.2 | 12 | 24 | 36 | | RATED INSULATION LEVEL (kVrms/kVp) | 10/40 | 20/60 | 28/75 | 50/125 | 70/170 | | RATED FREQUENCY (Hz) | | | 50 | | | | OIL FILLED TRANSFORMER<br> HV VOLTAGE<br> LV VOLTAGE<br> FREQUENCY | | | 25/40/63/100/250/315/400/500/630/750<br> /1000/1250/1600/2000/2500kVA<br> 3.3/6.6/11/22/33kV<br> 433V,3PHASE Or custom built<br> 50Hz | | | | DRY TYPE – VPI / CAST RESIN TRANSFORMER<br> HV VOLTAGE<br> LV VOLTAGE<br> FREQUENCY | | | 25/40/63/100/250/315/400/500/630/750<br> /1000/1250/1600/2000/2500kVA<br> 3.3/6.6/11/22/33kV<br> 433V,3PHASE Or custom built<br> 50Hz | | | | RING MAIN UNIT (RMU) | | | 11/22/33kV,3 PHASE,50HZ<br> SWITCH – 630/1250A,21/26.3KA,3PHASE<br> BREAKER – 200/630A,21/26.3KA,3PHASE | | | | VACUUM CIRCUIT BREAKERS (VCB) | | | 11/22/33kV,3 PHASE,50HZ<br> 200/400/630/1250A,18.4/21/26.3KA,3PHASE | | | | LOAD BREAK SWITCH (LBS) | | | 11/22/33kV,400/630A,3 POLE, AIR BREAK WITH FUSE ARRANGEMENT AND SHUNT TRIP COIL 230V AC | | | | TRANSFORMER | | | 3.3/6.6/11/22/33kV / 433V<br> 3Phase,50HZ WITH OFF CIRCUIT TAP CHANGER / ON LOAD TAP CHANGER, Dyn11 | | | | LV BREAKER <br> INCOMER MAIN BREAKER – <br> DISTRIBUTION ACB'S / MCCB 'S | | | 433V,3 PHASE,50Hz<br> 100A TO 4000A, 65KA<br> UP TO 10NO'S ACB'S / MCCB 'S | | |

Infrastructure

  • We have sophisticated modern machineries in our production lineup for manufacturing good quality products

Testing Equipments

Some of the Testing Equipmentsfor Routine testing of the products as per relevant IS / IEC standards are: | Testing Equipment | HV Kit | Dimmer | Motors | Insulation Resistance Kit | Contact Resistance Kit | Current Injection Kit | Voltage Ratio Kit | Power Analyser | Winding resistance meter | Oil BDV Kit | Pressure gauge | | Tests | Power frequency / High Voltage test | NLL, LL, %Z | DVDF | IR test | Contact resistance test | CT, Relay testing | Ratio test | NLL, LL, %Z | Winding Resistance test | Oil BDV test | Pressure test |

Benefits

  • Design conforms to International Electro technical Commission (IEC)62271-202 standard.
  • Compact substation construction saves floor space (Up to 70% in comparison with conventional systems).
  • Designed to withstand electrical impulses, thermal & dynamic stresses.
  • Equipments mounted on common ISMC channel base with fabricated CRCA sheet steel. Easy to lift both from top and bottom of CSS.
  • Easy installation / Maintenance of Transformer – Transformer can be installed / accessed from roof top or hinged doors / side panels.
  • Safety – Duct and Pressure relief flaps provided for operator and public safety from internal arc.
  • Meets IP55/IP54& IP23 degree of protection.
  • Designed to withstand electrical impulses, thermal & dynamic stresses.
  • Cost Effective – Costly cabling eliminated. Reduced civil work. Factory assembled & Factory tested, thus reducing the work to be done at site.
  • Enclosure is Aesthetically pleasing.
  • Protection from Unauthorized access & Environmental Hazards.
  • One point contact – Easy specification.
  • Low power loss and Low noise transformer.
  • Short delivery & ready for commissioning.
  • Custom built – variety of choices for MV/LV switchgears, no. of feeders to suit user requirements.
  • Modern manufacturing techniques ensure cost effectiveness, reliability & long trouble free performance, and better safety.
  • Replacement for conventional pole mounted transformers
  • Residential Complexes / Apartments
  • Commercial Buildings
  • Industries
  • Power Distribution
  • Hospitals
  • Software Parks
  • Development Projects
  • Construction Sites
  • Solar Power Generation

Certificates

ISO 9001/2008 certified
ISO 9001/2008 certified

Reviews

Reviews here are order-verified. Only buyers who completed a delivered order can rate this supplier, so the first review appears after the first delivery on BharatSeal.

Questions & answers

Ask the supplier. Answers are visible to all buyers

No questions yet. Ask the first one: the supplier is notified and the answer is posted here for every buyer.

Know your supplier

TRANSGEAR POWER SYSTEMS PRIVATE LIMITED
Unverified<1 yr on BharatSealBangalore, Karnataka
Year founded
2008
Certifications
2

More from Transgear Power Systems