WHITE MARK

WHITE MARK is a specially formulated, hot applied fast drying thermoplastic road marking materials. It has thickness control, skid resistance and long life than conventional road marking materials. MOST (803.4) AREAS OF APPLICATION WHITE MARK can be applied on all type of surfaces likes Bitumen, RCC/Cemented White , Yellow, Red, Blue Etc as per Customer Requirement Colour White Yellow Binder contents (% min) 18 18 Glass Beads (% min) 30 30 Titanium (% min) 10 - Yellow Pigment - As required Drying time (minutes) 5-10 5-10 Luminance at 45deg. Angle (% min) 65 45 Skid resistance (% mim) 45 45 Coverage (Kg. /me, at 2.5mm thickness) 5 5 5 Kg per sq. meter for 2.5 mm thickness on smooth surface. Road Temperature: Ambient Safe Heating Temperature: 190– 220°C Optimum Heating Temperature: 190°C (+ /- 10°C) Before application, the surface should be thoroughly dry free from dust, rust, moisture, grease, oil, loose particles or earlier coatings. Surface should be ready after all repair work like joints, sealing, filling or cracks, cavities and crevices should be carried out with appropriate materials. The material should be applied on the surface through road making Machine. The preheated material is transferred into the machines. It reaches the surface by gravity. There after, glass beads can be super imposed through a dispenser or manual spray for reflectivity. Alternately, the material can be screeded/extruded out from a larger motorized machine as well. Normal application thickness is 2.5 mm as per MORTH specifications. The use of a suitable primer is recommended when thermoplastic road marking material is to be applied to concrete surfaces Supplied in aggregate form, the material is packed in PE bags or special packaging as per requirement. Standard pack size is 25 Kg. in PE bag. This material is best kept at ambient conditions in a cool, dry and well ventilated in a cool, dry and well ventilated place. The shelf life of the product in the above mentioned conditions is up to one year approximately. During handling, maximum precaution should be taken, keep the bag sealed when not in use. Never use hooks to carry the bags. Avoid eye and skin contact. Safety goggles and protective gloves should be worn during handling. The information given is based on the results of tests conducted under strict lab. Conditions. However all recommendations and suggestions are made suggestions are made without guarantee, since the actual condition of use are beyond four control.