STATION MASTER CONTROL CONSOLE

The Station Master uses several Telephones for different communications for the purpose of smooth Train Traffic Movement in a Station. Practically, it becomes tedious to attend to the Telephones spread over the Station Master’s Table. The Station Master Control Console using Micro Controller, designed and developed by EPSILON enables easy and convenient operations by the Station Master / Assistant Station Master. This Unit enables communication in : A. 4 WIRE MODE (IRS:TC-60/2007) I Section Controller II Traction Power Controller III Traction Loco Controller IV Other Controller by pressing the designated Push Button Switch out of the 4 Controllers. B. 2 WIRE MODE (IRS:TC-80/2000) OR (IRS:TC-79/2000) For Point to Point Communication between: (i) Station Master & Assistant Station Master (ii) Station Master / Assistant Station Master and LC Gate (iii) Station Master / Assistant Station Master and Yard/ Maintenance etc. A 4 x 3 matrix keypad is provided for selecting the required Slave. C. AUTO MODE Keep the Push Button Switch provided on the Front Panel for selecting the BSNL or RLY. The Station Master also can talk to Auto Telephone Railway and DOT by pressing the Push Button marked RLY/DOT and provided on the Front Panel and by dialing the desired number. When a Call is received from any Auto Telephone, the respective LED shall glow. The Station Master can press the respective Push Button Switch and attend the Call. The Unit shall consists of the following : 1. One Handset with Press to Talk (PTT) Switch to be used only in 4 Wire Mode, kept on the left hand side of the unit. Another Handset for use with 2 Wire Intercom or Auto Telephones kept on the right hand side of the unit. 2. Cradle Switches. 3. 4 Nos. of Push Button Keys for Communication between Station Master and Controllers marked CONTROL I to CONTROL IV with LED indication provided beside. 4. 5 Nos. of DC Buzzers and 2 Nos. of AC Ringers. 5. Keypad (3 x 4 matrix) for the Selective Calling Telephone and Auto Telephone. 6. A Push Button Switch to select 2 Wire Intercom or Auto Telephone. 7. Two Push Button Switches for connecting to Auto Telephone. Two LEDs by the side of this Switch indicates connection to Auto Telephone. 8. A Push Button Switch to select up or down. 9. A Ringer Circuit with Ringer for ringing in case the Station Master is called on the Auto Telephone. OPERATION : 4 WIRE MODE : The Station Master can call any of the 4 Controllers by pressing the assigned Push Button (Enabling) and by pressing the Press to Talk Switch in the handset, the Station Master

No questions yet. Ask the first one: the supplier is notified and the answer is posted here for every buyer.