Zeorich Wall Putty

Pure white cement-based wall putty for a smooth, paint-ready surface — maximum 3mm application, excellent adhesion to masonry, renders and concrete for premium interior finishes.

01 Surface Preparation + - Surface must be clean, dry and free from dust, grease and loose material - Remove old flaking paint, efflorescence or loose plaster - Fill cracks or holes with appropriate filler before putty - Ensure surface is fully cured — minimum 28 days for new plaster 02 Mixing + - Add Zeorich Wall Putty to clean water (W/P ~0.40–0.45) - Mix with low-speed electric stirrer to smooth lump-free consistency - Allow 5 minutes slaking then re-stir - Use within pot life — typically 2–4 hours 03 First Coat + - Apply with steel trowel or broad putty knife — maximum 1.5mm - Allow to dry fully — 4–6 hours minimum, overnight preferred - Sand lightly with fine sandpaper to remove trowel marks - Surface should be smooth and consistent before second coat 04 Second Coat + - Apply second coat to achieve 2–3mm total maximum thickness - Sand lightly when dry for final smooth finish - Remove all dust before painting - Total maximum: 2 coats, 3mm combined 05 Painting + - Allow full 24 hours cure before painting - Sand with 150–220 grit sandpaper - Remove all dust - Apply paint within recommended timeframe for best adhesion